12-Gauge 3 1/2 inch Federal Plastic Shells Load Data

Name: 12-Gauge 3 1/2 inch Federal Plastic Shells Load Data
Creator: LoadDevelopment.com

17 published 12-Gauge 3 1/2 inch Federal Plastic Shells reloading recipes across 1 powders and 1 bullet manufacturers, with bullet weights from 1 to 2 grains and recorded velocities between 1,150 and 1,255 fps. Every load lists charge weight, velocity, COAL, primer and case where the source published it.

Always begin at the minimum charge weight and work up gradually. Never exceed maximum loads. Verify all data against a current published reloading manual before use. LoadDevelopment.com is not responsible for errors or omissions in this data.

Recipes

Powders

Bullet makers

Bullet weights

1–2 gr

Sample 12-Gauge 3 1/2 inch Federal Plastic Shells loads

The first 5 of 17 recipes.

Bullet	Powder	Charge	Velocity	COAL	Primer
Various 1 7/8 oz Shot 1 7/8gr	Alliant Blue Dot	38.0 gr	1200 fps	—	CCI 209M
Various 1 7/8 oz Shot 1 7/8gr	Alliant Blue Dot	38.5 gr	1255 fps	—	Winchester. 209
Various 1 7/8 oz Shot 1 7/8gr	Alliant Blue Dot	39.0 gr	1255 fps	—	CCI 209M
Various 1 7/8 oz Shot 1 7/8gr	Alliant Blue Dot	40.0 gr	1200 fps	—	Winchester. 209
Various 1 7/8 oz Shot 1 7/8gr	Alliant Blue Dot	37.5 gr	1200 fps	—	Winchester. 209

Filter every 12-Gauge 3 1/2 inch Federal Plastic Shells load

Open the full search to narrow 12-Gauge 3 1/2 inch Federal Plastic Shells data by bullet weight, powder manufacturer, powder and bullet make.

Search all 17 12-Gauge 3 1/2 inch Federal Plastic Shells loads

Powders used in 12-Gauge 3 1/2 inch Federal Plastic Shells load data

Blue Dot

Bullet makers with 12-Gauge 3 1/2 inch Federal Plastic Shells data

Various

Sample 12-Gauge 3 1/2 inch Federal Plastic Shells loads

Filter every 12-Gauge 3 1/2 inch Federal Plastic Shells load

Powders used in 12-Gauge 3 1/2 inch Federal Plastic Shells load data

Bullet makers with 12-Gauge 3 1/2 inch Federal Plastic Shells data

Related cartridges