12 Gauge 2 3/4 inch Winchester AA (HS) Plastic Shells continued Load Data

69 published 12 Gauge 2 3/4 inch Winchester AA (HS) Plastic Shells continued reloading recipes across 7 powders and 1 bullet manufacturers, with bullet weights from 1 to 7 grains and recorded velocities between 1,150 and 1,300 fps. Every load lists charge weight, velocity, COAL, primer and case where the source published it.

Always begin at the minimum charge weight and work up gradually. Never exceed maximum loads. Verify all data against a current published reloading manual before use. LoadDevelopment.com is not responsible for errors or omissions in this data.
Recipes
69
Powders
7
Bullet makers
1
Bullet weights
1–7 gr

Sample 12 Gauge 2 3/4 inch Winchester AA (HS) Plastic Shells continued loads

The first 5 of 69 recipes.

BulletPowderChargeVelocityCOALPrimer
Various 1 oz Shot 1grAlliant Cheddite15.6 gr1150 fps—CB1100
Various 1 oz Shot 1grAlliant Cheddite15.7 gr1150 fps—TGT 12
Various 1 oz Shot 1grAlliant Cheddite16.0 gr1150 fps—CB6100
Various 1 oz Shot 1grAlliant Cheddite16.2 gr1150 fps—12SO
Various 1 oz Shot 1grAlliant Cheddite15.5 gr1150 fps—CB4100

Filter every 12 Gauge 2 3/4 inch Winchester AA (HS) Plastic Shells continued load

Open the full search to narrow 12 Gauge 2 3/4 inch Winchester AA (HS) Plastic Shells continued data by bullet weight, powder manufacturer, powder and bullet make.

Search all 69 12 Gauge 2 3/4 inch Winchester AA (HS) Plastic Shells continued loads

Powders used in 12 Gauge 2 3/4 inch Winchester AA (HS) Plastic Shells continued load data

Bullet makers with 12 Gauge 2 3/4 inch Winchester AA (HS) Plastic Shells continued data

Related cartridges