.45-90 WCF/.45-2.4-in Sharps (34-inch bbl) Load Data

10 published .45-90 WCF/.45-2.4-in Sharps (34-inch bbl) reloading recipes across 4 powders and 3 bullet manufacturers, with bullet weights from 300 to 400 grains and recorded velocities between 1,508 and 1,835 fps. Every load lists charge weight, velocity, COAL, primer and case where the source published it.

Always begin at the minimum charge weight and work up gradually. Never exceed maximum loads. Verify all data against a current published reloading manual before use. LoadDevelopment.com is not responsible for errors or omissions in this data.
Recipes
10
Powders
4
Bullet makers
3
Bullet weights
300–400 gr

Sample .45-90 WCF/.45-2.4-in Sharps (34-inch bbl) loads

The first 5 of 10 recipes.

BulletPowderChargeVelocityCOALPrimer
Sierra FNHP 300grHodgdon H-489554.0 gr1,770 fps——
Hornady JHP 300grIMR IMR-303150.0 gr1,603 fps——
Hornady JHP 300grIMR IMR-303154.0 gr1,752 fps——
Hornady JSP 350grHodgdon H-489554.0 gr1,719 fps——
Hornady JSP 350grIMR IMR-303152.0 gr1,693 fps——

Filter every .45-90 WCF/.45-2.4-in Sharps (34-inch bbl) load

Open the full search to narrow .45-90 WCF/.45-2.4-in Sharps (34-inch bbl) data by bullet weight, powder manufacturer, powder and bullet make.

Search all 10 .45-90 WCF/.45-2.4-in Sharps (34-inch bbl) loads

Powders used in .45-90 WCF/.45-2.4-in Sharps (34-inch bbl) load data

Bullet makers with .45-90 WCF/.45-2.4-in Sharps (34-inch bbl) data

Related cartridges