.32 Smith & Wesson Short / .32 S&W Short for Class I Guns Load Data

14 published .32 Smith & Wesson Short / .32 S&W Short for Class I Guns reloading recipes across 10 powders and 1 bullet manufacturers, with bullet weights from 90 to 90 grains and recorded velocities between 409 and 543 fps. Every load lists charge weight, velocity, COAL, primer and case where the source published it.

Always begin at the minimum charge weight and work up gradually. Never exceed maximum loads. Verify all data against a current published reloading manual before use. LoadDevelopment.com is not responsible for errors or omissions in this data.
Recipes
14
Powders
10
Bullet makers
1
Bullet weights
90–90 gr

Sample .32 Smith & Wesson Short / .32 S&W Short for Class I Guns loads

The first 5 of 14 recipes.

BulletPowderChargeVelocityCOALPrimer
Lyman 313249 90grIMR 700-X1.4 gr521 fps—CCI 500 Small Pistol
Lyman 313249 90grIMR 700-X1.3 gr490 fps—CCI 500 Small Pistol
Lyman 313249 90grAccurate AAC-21.3 gr437 fps—CCI 500 Small Pistol
Hornady SWC 90grAccurate AAC-21.3 gr409 fps—CCI 500 Small Pistol
Lyman 313249 90grAccurate AAC-52.2 gr543 fps—CCI 500 Small Pistol

Filter every .32 Smith & Wesson Short / .32 S&W Short for Class I Guns load

Open the full search to narrow .32 Smith & Wesson Short / .32 S&W Short for Class I Guns data by bullet weight, powder manufacturer, powder and bullet make.

Search all 14 .32 Smith & Wesson Short / .32 S&W Short for Class I Guns loads

Powders used in .32 Smith & Wesson Short / .32 S&W Short for Class I Guns load data

Bullet makers with .32 Smith & Wesson Short / .32 S&W Short for Class I Guns data

Related cartridges